Highly polished cast Aluminium Table Leg with beautiful elegant lines.

These legs have a 25mm diameter nylon foot that screws into the base of the leg. This allows for up to 25mm of height adjustment to accommodate uneven floor surfaces or warped timber slab table tops.
Leg Height is 700mm (27.5”).
Span is 260mm (10.24") from the inside of the top plate to outside of the base – see the side view in More Details.
The leg has a very large top plate measuring 180mm (7”) by 100mm (4”) with 17 screw holes to ensure that these legs DO NOT WOBBLE.
They are extremely strong and able to support very heavy table tops. We have used them with a solid timber slab table top measuring 1.2m (47”) wide x 3.6m (142”) long to make a very large family dining table.
When using these legs no table sub frame is required, they screw directly to the underside of your choice of table top. This gives lots of knee room and makes it extremely easy to make your own table.

No sub-frame is required.
Other suitable table tops are;

  • Plywood
  • MDF
  • Laminated timber
  • A door
  • Pallets

These legs can be used outdoors but will oxidise to a matt finish unless powder or lacquer coated.

Set of 4 Highly Polished Cast Aluminium Table Legs

  • Each leg measures 700mm (27.55 inches) from the floor to the underside of table top. (Standard table height is 750mm - 29.5 inches)
    Large top plate with 17 screw holes.
    An adjustable nylon foot allows you to set the table up on uneven surfaces.
    Screws directly to the underside of the table top.
    Note that cast aluminium will oxidise to a dull grey if used outdoors. This can be prevented with a clear powder coating, or powder coating can be used to colour the legs.